Waching daily Jan 24 2019

I am building a new clock. A Las Vegas clock. Now

there's two important measurements I have to take in order for this clock to

be built. One is a measurement of the minute hand and the second one is the

measurement of the overall shaft length. So let's take a look. I have let me use

this ruler. Alright I got to figure out the length I'll need for my minute hand.

Because if my minute hands under five inches I can use a standard

American Made mini quartz motor. If it's over five inches I'll use a high torque.

So I'm going to measure from the center of the mounting hole and I'm going to want

my minute hand probably to come right somewhere on the dice. Maybe into

the second dice. That looks to be about almost three and three-quarters inches.

So if I get a three and three quarter inch hand that's going to come right in

the center of the dice. Now since it's coming into the center of dice. The

hand shaft length must come through the material here which is about 1/8 of an inch and

also clear the dice. So let me turn this around. See if you can see this. So what

I measure is up to the top and so I have the clearance there. Now I'm probably

going to have to get one of the movement I'm probably use an MVT7290A

a because it has an overall height of an inch and a quarter. Which will give me plenty

of clearance over here. Now most of the time you're measuring on the shaft you

measured the threaded part and the overall length. Because the threaded part

you have to have enough thread to go through here to put down the hex nut to

tighten, to the secure it to the clock face material. But that's really not important

the overall length for this clock is important. With every

movement you get the hardware that you need to mount the clock. You get a rubber

washer, you get a brass washer, you get a hex nut and you get it

minute hand nut and a cap nut. So we want that to come about halfway there so

let's look at our hands. When you measure clock hands you're not concerned about

the hour hand. It's irrelevant! What you're concern about is the length of

the minute hand and you measure from the mounting hole to the tip. So that's a

little over just a hair over three-quarters that's gonna be perfect

for this clock so I have my hand measurement and I got my the movement

that I need. So let's put this together this is a AA clock motor

American Made here in America in California. First, I put the rubber

washer on we're gonna slide that through all right and you can see I got plenty

of clearance for the hands. Then I take the brass washer put it on. Then I got

the hex nut just drop that down because I had to get such a long shaft it'll

take me a little while to screw this down. When you're screwing this down just

make it hand tight and the reason being if you over tighten it you could slow

down the movement. So I just recommend just make it hand tight and then you're

in good shape. Now we have the movement there there we go. Now let's look at the

clock hands. First a hand that goes on is the hour hand and that's a press on. So

we just get that like that and just press it on. Okay

now that's perfect now we have the American made I shaft which is a very

secure way to secure your minute here. Now you'll have in your hardware two nuts.

You have a minute hand not and a cap nut. You want to use the minute hand nut if

you have a second hand. If you don't have a second hand the finishing look is

with this cap nut and I don't have a second

hand I know what a second hand on here. So I'm just gonna screw on. Okay it's

pretty good twelve o'clock. See nice clearance there! Okay I just want

to make sure my hands are parallel alright there they are parallel

For more infomation >> Building a New Clock - Duration: 5:26.

-------------------------------------------

Thank You, Firefighters! First Responders Bat With Dodgers - Duration: 2:15.

For more infomation >> Thank You, Firefighters! First Responders Bat With Dodgers - Duration: 2:15.

-------------------------------------------

You Teach People How to Treat You, Tour of Consciousness with Dr Dain Heer - Duration: 7:30.

Hi everybody, this is Dr. Dain.

Welcome to this installment of the Tour of Consciousness from Dublin.

I know it doesn't look like Dublin but see over there it says Dublin Airport.

Yeah, I'm at the airport, I forgot, I'm bad!

Plus for the last couple days my body was doing some really weird things

it was not feeling good and I don't do sick very well.

But, we were facilitating an amazing Relationship Class here

and I gotta say it was just absolutely phenomenal.

We got the things that are going to be sort of rumbling the walls

throughout the world for the next several months, if not years.

It was just phenomenal hopefully I can share

some more of that with you as we go along.

One of the things that came up in class

and one of the things I wanted to point out to you

that you may never have thought of

is that we, how do I put this, I don't know if I can even explain it in a couple minutes

but I'm going to try, hopefully I can make it easy.

My brain is not working very well, it's early and cold...

Cooooold, hence my jacket.

Anyway, so you want to realize that basically two things.

Number one... Oh bird - Hi!!

Sorry, my ADHD is kicking in.

Now I forgot what I was going to say... See, see what I'm talking about?!

We teach people how to treat us and that applies in two different ways.

So, for example if you grew up in a family

where you were never supposed to be seen you learn not to be seen

and then you go out in the world and you're like,

"Why does nobody see me?"

That's one of the instances where you teach people how to treat you

and how do you get rid of that? Well, every time it comes up...

Because what happens, have you ever noticed some people

like everybody's talking to them, everybody's noticing them and you're like,

"Why doesn't anybody see me?!"

Well, it's actually the energy that we're being

that is showing them how to treat us and how to be with us.

So, in this case what you want to do is when that comes up,

the easiest thing to do is go,

"everything that allows that to exist, POC and POD."

or the whole clearing statement,

Right and Wrong, Good and Bad, POD and POC, all 9, shorts, boys and beyonds.

And if you're new to the Tour of Consciousness go to:

theclearingstatement.com

And use that friggin tool there because it changes everything

or at least it has for me, oh and lots of other people around the world.

Maybe it works...anyway I'm just so interested in steamy breath right now.

So, we teach people how to treat us and one of the easiest things to do is

to catch it in the moment and go, "everything that allows that to exist"

and run the clearing statement a few times

or just go POC and POD, POC and POD, POC and POD, POC and POD.

Now, it may not seem like it changes in the moment,

next time it comes up you do it again, "everything that allows that to exist"

POC and POD, POC and POD, POC and POD, POC and POD.

I know it sounds too easy, believe me,

all of Access seems too easy but it actually works.

Just keep doing it.

There will be a day where you'll be in a similar situation

and you'll actually be seen.

So, I just want you to have that because a lot of times we look out and we go,

"Well, this keeps happening to me..."

Well, if you keep putting it outside of you, it's going to keep happening to you

because your point of view creates your reality

and your point of view is this keeps happening to you

and this is what keeps happening.

So, that's why it keeps happening

That was so logical,

maybe I should try to be philosophical too, that was awesome!

Okay, now the other situation is basically a similar situation.

When you feel like you're bad or wrong for something

what happens is the people around you

that are related to that situation are going to go,

"oh, they're bad and they're wrong."

So, for example we were getting a ride to the airport this morning

and our car was supposed to be there

and it wasn't there at the time it was supposed to be

and so I called the service and they said,

"look, he should be right there, It's been really bad traffic."

And I was like, "okay, cool."

But when the driver arrived it was really funny because

he's probably used to being early, I don't know, maybe on time, It would be my sense.

Great guy but he had this energy of, "oh man you're going to be so mad at me."

And so for a moment I was like, "I am so mad at you!"

Of course I didn't say, "I'm so mad at you."

That would be kind of interesting though

if we lived in a world where if you had something going on with somebody

you would go, "I'm so mad at you right now!"

And nobody could take it seriously...

If you did that, it would be able to totally dissipate.

Maybe that's a future world I'm thinking of

or more like the world I'd like to create

because then you would be able to deal with what was, it would dissipate.

But then if we did that we'd have no movies

because most movies are based on

never telling anybody what's actually going on for you.

And then nobody tells each other until the very end

and they've got an entire movie

and then at the end they say what they could have said at the beginning

and the movie would have been two minutes long.

Now, I know why it doesn't happen, so we can still have entertainment.

Okay, anyway.

I've seen this so many times with thousands of people

and what I do when I have something

where somebody tells me about something and I want to get upset with them.

My first question now is, "Is this mine or theirs?"

Because you don't realize it but I've said this many, many, many times,

we are energetic beings.

Meaning we pick up on the energy of everyone and everything around us.

By the way, sorry about the shake.

Every time I talk, my hand shakes.

Maybe I should be Italian, maybe I should... Hello, sorry!

Anyway, so what you want to do if, let's say you're late for something

or let's say you broke somebody's something.

What you want to do is go, "okay, so all the that stuff, all the guilt,

everything I'm expecting to happen right now."

POC and POD, POC and POD, POC and POD, POC and POD.

Or you could just make a different choice.

The POC and POD exists where you know there's a different choice

but you can't seem to make it.

You could just make a different choice, get really present with yourself and go,

"okay, wait a minute I feel really bad.

I'm expecting them to make me feel bad because I feel bad."

Which is one of our favorite things to do as humanoids in the world, yaaay!

And the ADHD thing...

Bright shiny thing just went into my head

And you could get really present with yourself and acknowledge what is

and often times that alone starts to dissipate it.

If that doesn't work, POC and POD, POC and POD, POC and POD, POC and POD.

And another favorite,

"Interesting point of view I have this point of view"

Now, if you haven't heard that tool there's a lot of YouTube videos here on it somewhere.

All you got to do is find them and it explains that tool.

I'm not going to go into that right now because this video is already too long

but hopefully this is giving you some information

that will make your life easier, make your life better,

make your interactions with other people better.

And get out of that stuff where you go into reaction

or you make somebody react against you by the energy that you're showing up as.

So, thank you for listening.

What if you truly being you are the gift,

the change and the possibility this world requires?

You are my beautiful friends, thank you for being in the world.

Can't wait to meet you in person someday.

Bye-bye from Dublin.

Sorry it doesn't look like Dublin.

Oh wait, see... The gray skies - Dublin!

Bye!

Tour of Consciousness with Dr Dain Heer

Tools to change your life from Access Consciosness

Sign up here: