Waching daily Jul 31 2018

In Mastercam 2019, we have added three functions to the Model Prep tab:

Align to Plane, Align to Face, and Align to Z.

With Align to Plane you can quickly prepare a solid body for machining by positioning it in line with a specific plane.

Simply choose the top face and an edge on the solid that you want to align.

In this demonstration, we will align the bottom front edge of the stamp to the Top plane so that it aligns to the table.

Once you have selected the top face and edge of the solid, select the Transform to plane option in the function panel and choose the plane.

The preview lets you see how the stamp will align to the table.

Select from one of the ten origin points to anchor your solid.

In this demonstration, we will use this origin to center the bottom of the stamp to the top of the table.

To save the transformation, click OK.

If you need to include additional geometry when transforming a solid to a plane, use the Additional Geometry option to select wireframe and other entities.

In this example, we will include wireframe geometry when we move the solid.

Follow the same selection procedure to select the solid, and then click Select to return to the graphics window for the additional geometry.

We will use a Quick Mask here to quickly select the wireframe.

Click OK to finish the transformation.

The Align to Plane function makes it easy to create a new Working Coordinate System from a solid so you can align solids to entities that must remain in a particular orientation.

This time, we will first create a custom WCS from the solid and set its origin at the bottom-center of the part.

In a new operation, we will align the table to the new WCS.

Select the top face and the front edge of the machine table.

Select the Transform to plane option to align the table to the WCS you just created.

Set the origin so the preview shows that the table is appropriately positioned.

Click OK to finish the transformation.

Align to Face is the renamed and more powerful version of the Position function, which was introduced in Mastercam X9.

As in the previous version of this function, you can still easily mate the selected faces of two solids, like we see here.

The latest version of Align to Face now lets you not only mate faces, but also quickly align the edges of the solids that you mate.

In this demonstration, we will align an edge of the solid we are moving so that it is parallel to another selected edge on our target body.

After selecting the face on the solid that will be moved, Mastercam prompts you to create a reference edge.

Notice how the X axis of the gnomon aligns to this reference edge.

In a similar fashion, Mastercam prompts you to select a face then a reference edge on the target body.

The preview lets you see how the reference edges will align parallel to each other when the selected faces are mated.

Click OK to finish the transformation.

Previously known as Align Solid Body, you can now find the Align to Z function on both the Turning tab and in the Model Prep tab in the Layout group.

Continue to use this function to move or align a solid body to the Z axis of a selected Cplane.

Select a cylindrical face or edge of a solid body and either create a custom WCS, or transform the solid body to the Z axis of a selected plane, like we do here.

In this case, we will need to reverse the Z orientation of the solid.

Align to Z is particularly useful when mounting a solid in to a lathe chuck.

New in Mastercam 2019 is the ability to select additional entities to move with the solid.

If you need to include additional geometry along with the solid, use the Additional Geometry option to select wireframe and other entities.

In this example, we will include wireframe geometry when we move the solid.

Follow the same selection procedure to select the solid, and then click Select to return to the graphics window for the additional geometry.

Use a Quick Mask to quickly select the wireframe.

Click OK to complete the transformation.

The new align functions in the Model Prep tab, Align to Plane, Align to Face, and Align to Z, help you easily and accurately transform your solids.

For more infomation >> What's New in Mastercam 2019: Model Prep Align Functions - Duration: 6:53.

-------------------------------------------

The Hunt for Gold Slime - Duration: 3:44.

For more infomation >> The Hunt for Gold Slime - Duration: 3:44.

-------------------------------------------

😱 100% FREE - HOW TO STEAL COMPETITORS CUSTOMERS (FREE Traffic To Shopify) - Duration: 4:50.

what is going on guys my name is Jesse Eby if you're new to this channel welcome

i'll be releasing weekly content in regards to e-commerce shopify dropshipping and everything online entrepreneurship so many people hit me

up and they're asking me for methods to do various things without any money and

to open a business you need some money but I'm gonna share with you some tips

to where you can steal your competitors customers for completely free you can't

be lazy and you really gotta be ready to put in the work though but first I want

to thank the people that have donated it to my channel in the description I have

some affiliate links you guys have been using and all that money that the

channel earns will be invested directly into my youtube channel thus bringing

you guys more powerful content as time goes on I could only accept one more

mentorship because I need to be able to have the free time to dedicate to the

people they have donated for mentorship as well as provide free content for as

many people as possible if you haven't started Shopify yet consider in the

description the free extended trial that I have that gives you 30 days instead of

14 I'm the only one that's able to offer this so take advantage of that and you

get over double the free trial time I check the description there's tons of

resources in general in my description that help support the channel take a

look at that and let's go ahead and jump into the powerful content how to steal

your competitors customers for Shopify drop shipping alright let's go

mm all right all right boys and girls let's go ahead and jump into this now

when you're first starting out a lot of people don't have a lot of capital and

there's applications and there's services where you can pay for all of

this to be automated and it makes things a lot easier but when you're first

starting out you need to first earn that capital from using these free methods

earn some money and then invest that back into your business and scale

everything and get rocking and rolling here so this just give me a quick video

so for this example let's look at I just pulled up this random Instagram page

custom reels let's say you're in the fishing niche all you'll do is you'll go

to somebody that's in your niche and you'll go to their followers you'll go

through here and you'll start following whichever ones look like real pages

after some time these people will naturally follow you back at that point

you will DM them and let's go ahead and jump into my phone here and I'll show

you how to go about messaging them so we've gone through and we've followed

some random people and we get a handful of them they followed us back so let's

select this person here let's say this person followed us back already we're

gonna go here and we're gonna send them a message

so we'll message this person and you guys could save this message and just

copy and paste it

it's best if you give them a customized coupon code so in this example his name

looks like his name is Scott so you and make the coupon code and your

Shopify back-end something like that Scott 50 so it's personalized so they

realize it's not just random automated message necessarily that's

going off to everyone that follows them it feels more personalized you want to

leave a link to your website and have an open line of dialogue in case they have

any questions with you

and remember guys that 50% off is just an example the price that you want to

give them is a price that you breakeven on because the chances of them leaving a

store that they already have loyalty to is a little more slim you want to give

them a huge discount that allows you to break event but then you obtain them as

a lifelong customer so you'll have to figure out what that percentage is to

where you break-even depending on your item but that is the way to go ahead and

jump in and obtain some customers from competitors in your niche so like I said

guys just a quick video and when you're first starting out and if you don't have

any cash at all you really got jump in and get in the nitty-gritty get your

hands dirty and really dive in and contact people manually and just really

you got to be obsessed about it otherwise you're gonna get burnt out so

hopefully this was helpful for some beginners starting out trying to get

those first sales so that you can obtain sales and obtain some capital and then

invest that into growing your business I'm probably going to start doing

shorter videos because the audience retention on my videos is on average

pretty low let me know if you like the longer form videos or if you want the

shorter form videos in the comments below

drop a like on the video drop a subscribe if you haven't yet so we could

help this movement succeed and save as many people from being scammed by the

scamming gurus as possible all right thanks for stopping by be sure to

subscribe peace out

For more infomation >> 😱 100% FREE - HOW TO STEAL COMPETITORS CUSTOMERS (FREE Traffic To Shopify) - Duration: 4:50.

-------------------------------------------

Veridian Digital Pulse and BloodOxygen Oximeter - Duration: 9:31.

For more infomation >> Veridian Digital Pulse and BloodOxygen Oximeter - Duration: 9:31.

-------------------------------------------

hey, my name is beatriz - Duration: 1:11.

(song begins) sometimes...

i sit in my room...

sometimes...

i sit in my room...

For more infomation >> hey, my name is beatriz - Duration: 1:11.

-------------------------------------------

What's New in Mastercam 2019: Advanced Toolpath Display - Duration: 3:29.

Mastercam's new Advanced Toolpath Display gives you a number of tools that you can use to isolate and examine specific toolpath motion.

This is especially useful in parts that have many toolpaths.

Consider this OptiRough toolpath that roughs out the cavity.

Mastercam's default toolpath display settings let you see the rapid moves in yellow, but there are still many types of cutting moves that you might want to examine.

The first thing Advanced Toolpath Display does is assign more colors to different parts of your toolpaths, so you can tell them apart.

In this example, the entry moves are green, and the microlift moves are brown.

You can choose which types of toolpath motion to display.

For example, turn off the rapid retracts so you can more clearly see the feed rate moves.

You can also customize the colors assigned to each motion type.

For example, you can make the microlift motions a bright red so they are easier to see.

In addition to the color, you can also customize the style of the line.

For example, you can use dashed lines or thicker lines.

Now we'll hide the microlift motions and entry motions.

You can see the toolpath's cutting passes much more clearly.

Another useful option is the ability to customize drill point display.

Displaying the drill tool diameter as a thick dashed line makes it easier to see.

You can also customize the display of multiaxis toolpath vectors.

For example, you can make the vectors shorter so the toolpath is easier to see.

This toolpath has feed rate retract moves.

You can hide those too.

Notice that the Advanced Toolpath Display functions are also available in the Toolpath Manager toolbar.

Toggle the multiaxis vectors off and on to focus on the cutting passes.

When Advanced Toolpath Display is turned on, Backplot also uses its colors.

Finally, Mastercam lets you include the Advanced Toolpath Display settings when you create bookmarks and viewsheets.

Combining these features lets you easily create and save highly customized views of your toolpaths that you can return to with a single click.

Advanced Toolpath Display gives users complete control over how their toolpaths are displayed.

For more infomation >> What's New in Mastercam 2019: Advanced Toolpath Display - Duration: 3:29.

-------------------------------------------

Tucson Water Quality Assessment: What You Need To Know - Duration: 2:47.

Tucson, Arizona recently released its annual water quality report, and our Water Nerds

dug through it so you don't have to!

Unfortunately, we found some major problems with Tucson's drinking water.

Chromium 6 is by far the biggest concern in Tucson's drinking water.

Chromium 6 is a highly toxic metal that is currently unregulated by the EPA.

Chromium 6 pollution is associated with metal processing, tannery facilities, chromate production,

stainless steel welding, and pigment production.

In this years water quality report, concentrations of Chromium 6 were detected as high as 94

parts per billion and averaged 4.72 parts per billion.

These levels are nearly 4700 times higher than the concentration determined to have

a negligible impact on cancer risk.

EPA has acknowledged that Chromium 6 is a known human carcinogen through inhalation,

but is still determining its cancer potential through ingestion of drinking water.

Next is perfluorinated compounds.

This years water quality report for Tucson, Arizona included test data from two Perfluorinated

Compounds: Perfluorooctane-sulfonic acid (PFOS) and Perfluoro-1-hexanesulfonic Acid (PFHxS).

Concentrations of PFOS were detected as high as 56 parts per trillion, and averaged 28

parts per trillion.

Concentrations of PFHxS were detected as high as 420 parts per trillion and averaged 210

parts per trillion.

The Agency for Toxic Substances and Disease Registry (ATSDR) recently recommended setting

a Minimum Risk Level of 20 parts per trillion for PFOS, but are still researching the toxicity

profile for PFHxS.

These data from the ATSDR are preliminary and the effects to human health are still

unknown.

This category of chemicals are "emerging contaminants" which means they are thought

to pose a potential threat to human health and the environment, but haven't yet been

regulated.

Next is Arsenic.

Arsenic is a heavy metal that typically leaches into groundwater as surrounding bedrock naturally

weathers overtime.

The concentrations of Arsenic in Tucson's water were detected as high as 7 parts per

billion.

The federal Maximum Contaminant Level for Arsenic in drinking water is 10 parts per

billion, but regulatory agencies acknowledged that this level should be reduced to 1 or

even 0 parts per billion.

Arsenic is a toxic substance that is linked to a long list of health problems in humans.

Our Water Nerds are on the lookout for other cities to cover.

If you would like us to see what's going on in your hometown, please let us know and comment

below!

Also, If you have any questions about this report or anything else water related, drop

us a line at hello@hydroviv.com, or visit hydroviv.com and use our live chat.

Our Water Nerds are based in Washington DC and can gladly answer any questions you might

have.

For more infomation >> Tucson Water Quality Assessment: What You Need To Know - Duration: 2:47.

-------------------------------------------

What do you say? Advice for parents about the first day of kindergarten - Duration: 1:59.

For more infomation >> What do you say? Advice for parents about the first day of kindergarten - Duration: 1:59.

-------------------------------------------

134559300 - Replacing Your Frigidaire Dryer's Door Glass Bracket AP3889771 PS1524503 - Duration: 5:48.

Hi my name is Bill and today I'm going to be showing you how to replace the door glass

bracket on your dryer the reason why you might have to do this is because it's damaged or

missing for this repair we'll be using a screwdriver with a T20 torx bit and a phillips head screwdriver

WARNING before doing any repairs please disconnect your power source

so this is the dryer that

we're going to be using for this demonstration it's a Frigidaire keep in mind that you might

have one that's not quite exactly the same as this is but the same technique should still

apply so we're going to open up the door here and we need to remove our dryer door so in

order to do that we need to remove the two phillips head screws right in here on the

hinge

so now what we're going to do is just slightly lift up on the door and just wiggle it a little

bit might be a little different to get the door hinge out you should be able to get it

out now on this door hinge here which fits nicely into that hole now we need to take

the door apart to get it apart we need to take out the five screws around the perimeter

now that we have the screws out we can separate the two door halves so now that we have the

two halves apart you'll see we have this big piece of plastic right here and to get

that off we're also going to need to remove these screws here and you'll see that once

you have the screws out that plastic piece just drops right out so now we're going to carefully

lift up hold the glass there in place so it doesn't fall out so right here is our door

glass so in order to get the glass out we're going to have to take the off brackets

that are holding them in place so now I'm going to be using the T20 torx bit and I'm

going to be loosening everything up with these screws right here on each side so now I'll

take out the old bracket and now you can grab your new OEM replacement door glass bracket

and if you don't have one already you can find it on our online store we're going to

put this bracket on there so we're going to get our screw and get it started from the

other side not going to flip it over just yet and give that a couple turns and now our

glass should stay in place so now we'll tighten up the screws here and we'll bring the glass

back up and secure it and now we'll turn this back over and we're

going to line up this piece right here with the screw hole there and put the two halves

together and then from this side we're just going to hold one side up and get a screw

started on that side so now we're going to do the same thing on this side and push up

on the inner ring from the other side and we're going to get the screw started and once

it's started a little bit secure it the rest of the way now we an put the two halves of

the door back together so we're just going to line up the screw holes and once you have

everything lined up you can screw it back together now that we have the door back together

we'll put the hinge back onto the frame here and you're just going to line up that square

peg with the square slot drop in it and then you're going to line up the screw hole and screw it back in

and once you have that screwed back into place you can close your door and your repair

is complete

Finally don't forget to plug in your appliance

If you need to replace any

parts for your appliances you can find OEM replacement part on our website pcappliancerepair.com

Thanks for watching and please don't forget to like comment and share our video also don't

forget to subscribe to our channel your support helps us make more videos just like these

for you to watch for free

For more infomation >> 134559300 - Replacing Your Frigidaire Dryer's Door Glass Bracket AP3889771 PS1524503 - Duration: 5:48.

-------------------------------------------

Highly Intelligent People Are More Easily Distracted at Work-Here is Why - Duration: 2:41.

Highly Intelligent People Are More Easily Distracted at Work - Here is Why

Being highly intelligent doesn't mean everything is easy for your work.

As much as any other people feel, intelligent people also feel a lot of pressure and distraction,

even worse.

So, do you have trouble concentrating at work?

It's probably because of all those amazing ideas you have running through your head and

you can't get it off.

Finding yourself easily distracted at work may sound like a bad thing but there could

be a silver lining to your daily office woes.

Workers who have trouble concentrating on a daily basis may be intellectually superior

to their colleagues, according to a new study.

The Research Suggests Intelligent people may find it difficult to focus the mind because

of all the amazing ideas constantly running through their genius brains.

According to psychiatrist Dr Ned Hallowell, the cleverest among us find it difficult to

prioritise which idea to focus on first, with the distractions potentially leading to "a

feeling of inadequacy and inability to deal with the workload as a whole".

He added that the brightest brains can end up falling short of their own expectations

and also of what their boss expects.

"Employers are always on the lookout for the brightest people available, however the

difficulty to withstand multiple tasks and distractions in the office affects smart people

in the same way as everyone else, if not more," explained Bostjan Ljubic, vice president of

Steelcase, who published the research.

"The ways in which we work are changing more rapidly than ever before and the brain

is being subjected to stresses and distractions which can lead to overload and statistics

show that distractions in the workplace are on the rise."

The study of 10,000 workers from 17 different countries also found that the increased use

of technology in the workplace has made it more difficult for staff to stay focused,

with the average office worker distracted once every three minutes.

Well, that's the reason why highly intelligent people are more easily distracted at work.

Really cool information isn't it?

Leave us a comment down below and let us know what your thought of this video.

Don't forget to give us account subs and watch other amazing videos on our channel.

Also, don't forget to check link on the description below to see our interesting offer that might

be useful for you.

Thanks for watching!

http://www.telegraph.co.uk

For more infomation >> Highly Intelligent People Are More Easily Distracted at Work-Here is Why - Duration: 2:41.

-------------------------------------------

Teen Goku vs. Raditz | Dragon Ball Z: Budokai Tenkaichi 3 MOD [CC] - Duration: 5:00.

Raditz: So, you actually came. How surprising.

Teen Goku: You know why I'm here! Give me back my son!

Raditz: So you'd defy your own brother?

Teen Goku: I don't have a brother!

Raditz (in background): Kakarot, I thought you'd be smarter than this. It's disappointing that you're so foolish.

Raditz (in background): Don't tell me you actually think the two of you can win? Ridiculous! You don't stand a chance!

Teen Goku: Hehehe. Looks like we (I) managed to win. That was one heck of a fight, huh?

For more infomation >> Teen Goku vs. Raditz | Dragon Ball Z: Budokai Tenkaichi 3 MOD [CC] - Duration: 5:00.

-------------------------------------------

Arensky - Let It Fall (ft. Poupie) - Duration: 2:52.

Skylr Infinite

For more infomation >> Arensky - Let It Fall (ft. Poupie) - Duration: 2:52.

-------------------------------------------

Anna Worden: 5 Fast Facts You Need to Know | Heavy.com - Duration: 4:18.

Anna Worden: 5 Fast Facts You Need to Know | Heavy.com

An Iowa teenager has ended up in the ICU after attempting the Kiki challenge, a popular dance trend that has gone viral.

The Kiki challenge has inspired thousands of teenagers across the world to perform a choreographed dance to Drake's "In My Feelings.

" The dance requires that people exit a moving vehicle and hop back inside after performing the routine.

Here's what you need to know about Anna Worden.

She Was Airifted to Iowa City Hospital.

Anna explains that after getting out of the car, she tripped and "fell and hit my head." She was unconscious and rushed to a hospital.

She was subsequently airlifted to Iowa City.

Mike Worden, Anna's father, tells Fox 6 Now, "I had five minutes to give her a kiss and not know what was going to happen.

I will always remember that," said Mike Worden.

She Has to Re-Learn How to Walk.

According to Fox 6 Now, Anna suffered a skull fracture, and has blood clots in her ear and bleeding on her brain.

She tells the outlet, "When we got here and I finally gained consciousness in the ICU, that's when it hit me — like 'wow, I'm actually in the University of Iowa hospitals because I tried to do some little challenge everyone's doing now, and I'm the one that got majorly hurt.

She Has Been Dancing Since She Was 3.

Anna, who graduated from Pleasant Valley this year, has been dancing since she was just 3.

Now, she says she's learned a lesson about partaking in popular trends and fads.

"Be more careful about the challenges and fads that are going around.

It may seem fun, and it may seem easy, but at the same too, they could be so dangerous.".

Another Man Was Hit by a Car During the 'in My Feelings' Challenge.

22-year-old Jaylen Norwood was attempting the "In My Feelings" challenge when he was hit by a car.

Norwood was attempting to jump onto the hood of the vehicle, according to WGHP.

According to Fox 6 Now, the National Transportation Safety Board issued a statement in response to the challenge.

She Hoped to Be Released from Hospital July 30, 2018.

The hope was for Anna to be released from the hospital on Monday, July 30.

It's unknown at this time if she was successful in leaving the hospital.

Once home, according to Fox 4 KC, she will be "doing outpatient physical therapy closer to home.