Hey, I, you're the one that I...
I to you
I-I-I-I-I-
sigh sorry i forgot
Wait!
I-i-i-i-i-i-i-
Like, love you!
....
I like you too <3
-------------------------------------------
Fort Worth neighbors make a simple, powerful statement in their front yards - Duration: 1:50.
For more infomation >> Fort Worth neighbors make a simple, powerful statement in their front yards - Duration: 1:50. -------------------------------------------
New York | Midtown North | Grand Central Terminal - Duration: 3:07.
The central train station in New York,
which we can see right behind us here,
is one of largest and busiest in the world.
It's 44 platforms, all of which are underground.
It does have a bit of an identity crisis though,
because you hear some people call it Grand Central Station
and other people calling it Grand Central Terminal.
But here's the deal, back in 1871,
it was actually opened as Grand Central Depot,
but then in 1901, it had a big expansion and renovation program
and it was reopened as Grand Central Station,
and then 12 years after that, 1913,
it had some more renovations
and was renamed Grand Central Terminal.
When you're inside Grand Central Terminal
be sure to take a look up to the ceiling because
you'll be greeted with the magnificent sight of
many stars and constellations.
This was created back in 1912 by two artists, Helleu and Basing,
and they spent several months just perfecting the perfect
shade of blue for the night sky,
and of course installing some 2,500 stars,
some of which are illuminated with little light bulbs.
If you take a closer look, you notice the stars are
back to front and there are two theories for this, one,
that it was all a bit of a blunder and someone had
the blueprints the wrong way round and the other,
perhaps more romantically, that they were trying to imagine
what the stars must look like if you're
looking down on the Earth from the heavens above.
In 1998, a few decades after it was first installed,
the ceiling was starting to look rather grubby
and they thought this was mainly due to the smoke and pollution
from the train locomotives but actually,
when they analyzed the material coating the surface,
they found it was mostly due to cigarette smoke.
Anyway, they did a big cleanup operation,
restored the ceiling to its former glory
but they left a little one-foot patch there,
just to show how dirty it used to be.
-------------------------------------------
3Wheel StairClimbing Folding Cart with Nylon Liner - Duration: 10:46.
For more infomation >> 3Wheel StairClimbing Folding Cart with Nylon Liner - Duration: 10:46. -------------------------------------------
Rear Wheel Bearing Replacement DIY - Duration: 3:05.
Now here we have a wheel bearing problem
and you can see the wheel shake, and also
when you're driving it you can really
hear it hum.
Ok well let's get started with the wheel
on the ground
we're going to take the axle build off
with an impact wrench, and then go ahead
and let's remove the wheel. We will pull the
caliper off get the brake pads out of
there and let's go ahead and remove the
caliper different caliber folds out
here's the next one and the piece for
the caliper.
Go ahead and pull the rotor off and the
rotor shield.
Ok so now we're going to take the wheel hub
off and you just kind of Hammer it off
and it comes right off.
Now we're going to take the wire for the
ABS sensor off because you definitely
don't want to take out the sensor from
the hub because you'll ruin it every
time. So we pull out the seat and go
ahead and disconnect the wire and then
we're going to wrap a string around it
and pull it through and then when we
pull the new wire through it's going to
work just fine.
Ok so now we're going to take off the
knuckle and you just pound this bottom
portion out and this is actually where
the alignment happens. And then go ahead
and start to pulling off all the parts
that connect the knuckle. Ok so now we
just take all these cases off and then
you just kind of wiggle it and it comes
out. Ok so now that we have it off the
car we're going to go ahead and start
pressing out the old bearing there it
goes.
Ok so now we're going to take the old
ball bearing and we're going to start
grinding it down just a little bit
because we're going to use this
actually push the new bearing into place
and be able to get it out. So go ahead
and tap it with a plastic hammer.
Let's put the ground down ball bearing
on to the new bearing and then we're
going to use the press to go ahead and
start pressing the new wheel bearing
into the wheel hub. So this concludes our
wheel bearing replacement and there's no
wheel bearing noise. That is great.
Hey, if you like what I've got please and
like and subscribe.
-------------------------------------------
Fort Worth neighbors make a simple, powerful statement in their front yards - Duration: 1:50.
For more infomation >> Fort Worth neighbors make a simple, powerful statement in their front yards - Duration: 1:50. -------------------------------------------
Cannabis 420 News: Attorney General Jeff Sessions Admits Crackdown of Legal Weed States Challenging - Duration: 8:11.
Hey Stoners Welcome to The Johno Show I'm your weedtuber host Jonathan.
It's Monday March 13th 2017 and this is your weed news of the week.
Our main story tonight is that Jeff Sessions has admitted cracking down on states that
have already legalized would be Challenging.
But first our other weed news.
In "Oh the humanity" news...
We start off with a rather disappointing story.
Las Vegas' first Cannabis Cup took place last week and was a complete disaster.
It had been planned as a full-fledged marijuana festival celebrating the recent legalization
of adult use cannabis in Nevada but quickly turned into a cannabis-free convention-style
expo with over a dozen empty booths and an entire day cancelled due to high winds.
An event spokesperson said they did everything possible to make the event compliant with
federal law.
However, a letter sent to the cups organizers by Federal U.S. Attorney Daniel Bogden threatened
to "enforce the Controlled Substances Act," if federal laws against marijuana weren't
followed during the event.
Bogden pointed out in his letter that an original assumption made by the organizers that cannabis
was legal on tribal land was an incorrect interpretation of the law.
So a festival that promotes itself as being everything cannabis infused turned out to
have their medicated cookies just regular cookies.
Their THC-infused topical lotions simply lotions.
And worst of all voting for Cannabis Cup winners meant purchasing products legally at Las Vegas
dispensaries, trying them on your own and then submitting your ballot at the festival.
To top off this disaster, forecasted winds of up to 40 miles per hour with wind gusts
reaching as high as 60 mph required the organizers to cancel the second day of the event entirely.
In "You Want Me to Put That Where" News...
Doctor's in Vancouver and throughout Canada have recently come together and recommend
against smoking marijuana.
These doctors feel absorption through the lungs doesn't provide enough benefit and
includes many risks.
Eating the plant also interferes with the gastric acids in the stomach.
Instead they are suggesting the right intake of the drug is rectally.
The doctors sight volume of absorption as the major beneficial factor.
One doctor on the panel said quote: "You can put a lot more and it gets absorbed a
lot better, but not everybody is open to this way of administration,''
So, I can guarantee you as host of this show; there will be an upcoming episode where I
stick a nug up my butt.
In "Just When You Thought It Was Safe" News...
Approximately 70 medical dispensaries are at risk of being shut down in the unincorporated
areas of L.A.
In 2011, The Board of Supervisors banned all dispensaries in the unincorporated areas,
so the risks have been well known to marijuana business owners.
Last month, the board voted to extend that ban.
The crackdown would come a day after city of Los Angeles voters weigh in on Proposition
M, which proposes to give the City Council power to legalize, tax and expand the number
of marijuana businesses in town.
In "Whoops we funded what" News...
The Denver FBI honored a youth dropout prevention group without realizing it was partially funded
with taxes from the marijuana industry.
Tax revenue from cannabis sales have gotten so widely dispersed in Colorado that it's
nearly impossible to keep track of the scores of social programs that now depend on its
funding.
The organization "Youth on Record" mentioned the marijuana funding the group receives when
accepting the Director's Community Leadership Award at Denver FBI headquarters.
"Youth on Record" received $75,000 in marijuana tax revenue last year from the city
of Denver and is expecting an additional $148,000 this year.Finally our top story…
Speaking on the Hugh Hewitt Show Attorney General Jeff Sessions said It's not possible
for the federal government to take over everything the local police used to do in a state that
legalized marijuana.
Other published reports have suggested Session's has privately reassured some senators that
his Department of Justice wouldn't significantly deviate from the Obama administration's hands-off
approach to states that have decriminalized cannabis.
Hugh Hewitt insisted the attorney general could wipe out recreational marijuana in places
like Washington and Colorado by filing just a single racketeering charge.
But Sessions pushed back and explained that it's a little more complicated.
Other members of the Republican party are still eager to sway public opinion and are
willing to use old myths and scare tactics to do it.
U.S. Sen. Rob Portman an Ohio Republican spewed out the "gateway drug" myth in his 32nd speech
against marijuana.
He has boldly lied to his constituents that his state's marijuana supply is being laced
with the powerful opiate fentanyl, a claim that appears to be wholly unsupported by both
Ohio police and narcotics experts.
But don't despair because there is something you the common citizen can do right now to
push legalization forward.
On the website Everyaction.com there is a form available, and I have it the description,
where you can send your representative a note asking them to join the Cannabis Caucus.
It reads "Federal marijuana laws are outdated.
Thankfully, a new Cannabis Caucus is forming in Congress that is specifically dedicated
to modernizing federal marijuana policy so that states can effectively implement their
own laws without interference."
It's a super easy form.
Yes, they do ask for a donation afterwards but you can just ignore it like I did.
I'm not going to read aloud the letter that goes to your representative but I have read
it and it is very well worded.
I highly suggest you send your representative the letter today.
Now onto ANNOUNCEMENTS
Don't forget to enter the FocusVape Pro contest we have going on here at The Johno
Show this month.
One lucky winner will get a FocusVape Pro Pen and three runners up with get a Vaped.com
grinder.
Thank you to Vaped.com for sponsoring this contest.
If you have an announcement or a question please send them to me via social media.
Thank you for listening.
Please let me know if you liked this episode by sharing it with your friends on social
media and giving it a thumbs up.
If this is your first time here please consider subscribing.
The Johno Show produces a Daily Show Monday through Thursday.
Thank you for letting me be a small part of your lives.
Please subscribe and consider supporting The Johno Show on our Patreon page.
Thank you Bye!
-------------------------------------------
Clickbait - Duration: 4:22.
For more infomation >> Clickbait - Duration: 4:22. -------------------------------------------
At Boston, change the public light by texting - Duration: 2:20.
Twelve pillars lying on the Greenway,
warming the city with the ever
changing light. By texting a color to a
phone number, passers-by can change the
light to whatever colors they want. For
the installation which is called "Color
Commons," the Greenway once again teamed up
with the New American Public Art, the
same people who designed the sensor
system in 2013. So our group New American Public
Art likes to re-leverage the built
environment so you were walking in the
Greenway one day and saw the light
blades and we asked ourselves wouldn't it
be amazing if we could interact with
this, if the public can control over
this piece of city infrastructure. And a
part of our goal as artists is to make
interactive public art and to give
people agency over, over the public space,
and so people feel a little bit of
ownership in the built environment.
Because we consider ourselves as
interactive artists we believe the
definition of interactive art should
truly mean getting two people to talk
to each other, that true interaction
occurs between people and not really
between machines, or people and a machine
So ideally when you go down and you
start texting the lights, then you share
the number with a friend, or you start
sort of like having a color battle with
a friend, and then the art truly becomes
interactive. So so far we've gotten, I would say
an upwards of 6,000 texts from
over 400 different unique people. And I
think that's an amazing success. Like on
a single weekend night, we get typically
a thousand texts. When the people, when you
have control of that, standing there,
underneath the lights, really is the kind
of a wonderful feeling. Passers-by were
amazed by the installation. It made me really
excited. Because we're just happy. Yeah, because we
didn't know we could change it,
and we're touring today, and then you
told us, it makes us feel like
so happy. And makes us feel powerful. I know. Wow, you're great.
It's like we can control the color. We can control the city.
For the people who missed it, don't worry. The "Color Commons" will
be there for all winter. And you still
have plenty of time to go and play.
Learner Liu, at Boston.
-------------------------------------------
Mechanistry | Steampunk Short Story by Christopher Herron - Duration: 9:24.
Tall Tale TV presents: Mechanistry
Written and recorded by Christopher Herron
"Is it suposed to do that?"
Nalt lifted his clipboard like a protective shield.
The mechanical dog began to shake, smoke billowing from its hindquarters.
Nalt coughed as the acrid cloud began to fill the campus courtyard.
"Of course it is," Stokes raised an eyebrow as if daring Nalt to argue.
"What else did you expect it to do?"
The dog gave a low rumble followed by a loud bang.
Nalt tried to cover more of himself with the wafer thin barrier.
As luck would have it he had just the right amount of muscle tone to actually fit.
This appeared to mollify Stokes.
His mustache bristled as he knelt beside the patchwork pup.
After a quick inspection, he began the technical process of tuning its internal logic matrix,
the brass hammer clanging against its left haunch.
The smoke sputtered and died.
So did the rest of the dog.
"Hand me the precision omni-torsion adjuster."
"Omni-what?"
Nalt reached into an overflowing toolbox.
"The screwdriver.
. ." Nalt's brow furrowed.
He hauled out a screwdriver that looked more suited to battle than tightening screws.
He wasn't sure why a screwdriver would need four prongs, a serated blade and a small level,
but someone had felt the need to weld them on.
Stokes snatched the travesty from Nalt's outstreatched hands.
It looked tiny in his massive grip.
But then again Stokes was the kind of man that could use a shovel as a spoon and nobody
would notice.
Nalt pushed his safety glasses further up on his thin nose and took a long step back,
half expecting . . . Well, he didn't know what he was expecting.
But safety protocall stated that when assisting a senior Mechanist the recomended distance
to stand was 'Keep running.'
After the contraption had managed not to dismember anyone for several seconds, Nalt worked up
his courage.
"Uh, sir?"
Stokes didn't bother looking up from his impromtue surgery.
"Yes, Mr. Knobs?"
"Nalt, sir.
It' just.
. . What, if you don't mind my asking, is the intended purpose of this . . . dog?"
It was a stretch to call the thing a dog.
But under the riveted metal, patches of glued rabbit hide, and various protruding cogs,
it was most definitely dog-ish.
It had at least four legs, what might have been a tail, and a face only a mother could
love.
Assuming she was blind and possibly insane.
"I mean, I understood the robotic hamsters.
We needed something to power the automo-carriages.
But why a dog?"
Stokes stood, placing the screwdriver behind his ear for safe keeping.
Wiping grease on his leather apron, he gave the canine robot a swift kick.
It clanked, whirred and shook itself back to life.
"Companionship, my dear Mr. Knobs!
Far too long man has gone alone in this savage world.
We need loyal pets to fulfill our needs of love and affection.
Or some such tosh.
I don't know, I just built it."
"I get that, but what about, you know, dogs?
Proper dogs I mean."
Nalt drummed his nervous fingers around the edge of his clipboard.
He moved, placing the considerable bulk of Master Stokes between himself and the mutt,
as if he were a blast door.
Better safe than sorry.
"Bah.
Far too common for the modern day gentleman, don't you think?
No, what we need is a lovable automaton.
Not some run of the mill, pee on your carpet, eat your slippers, flea-ridden 'natural' animal.
My D.O.G.G.Y.
Can do all that in one tenth the time!
Besides, can a regular 'dog' do this?"
Stokes patted his apron, searching the many pockets.
With a triumphant flourish he produced a small leather ball.
"Fetch, boy."
The ball disappeared across the lawn towards the campus.
Nothing happened.
"Very impressive, sir.
It's just, what if this dog is anything like your other creations?"
Stokes retrieved a second leather ball and repeated the process.
"What do you mean?"
The dog watched unconcerned as the ball became a tiny dot in the distance.
Drawing a sinister whatchamacallit from his toolbox, Stokes began prying open the mutt's
cranium.
"Your auto-feeding fork, for instance."
Stokes prodded at the small tubes and gears inside the canine's brain.
"Smashing success, that one."
"Yes sir, but as a lawn trimmer.
And what about your self-aware top hat?"
"As I recall, they still use it for public executions.
Get to your point, lad."
Nalt set his jaw and plunged onward.
"What I mean to say, sir, is that your inventions never seem to serve their original purpose.
And, in fact, quite often render their users maimed, amnesiac, and in some cases impotent!
Do you truly feel the world is ready to bring home a family pet that may well leave little
Jimmy a one-eared eunuch?"
Stokes sighed and shut the brain pan with a metallic clang.
He placed an affectionate hand on Nalt's shoulder, causing his knees buckled and creaked beneath
the force.
"Mr. Knobs, you're a good lad.
You work hard, keep a tidy toolbox, you didn't complain when my ear wax remover erased three
years of your memory . . ." "Wait, what?"
"But what you young bucks don't understand is that mechanistry is not about what you
build, or even about what it is meant to do.
The heart and soul of mechanistry is seeing what it does when you flip the bloody switch!
If it's not broke, re-engineer it.
That's our motto!
Only through random experimentation and unexpected outcome may we stride bravely into this new
world."
Stokes' grip tightened around Nalt's shoulder as he grew more passionate.
"Where would we be without Master Archivald's flame retardant tea cozy?
Or Senior Member Willikie's heat seeking apple corer?
Mechanists build not because we can, nor even because we should.
Nay, we build because nature's done a piss poor job of it all and it's time someone else
tried a hand!"
Nalt stared slack-jawed at the madman before him.
"You're completely off your rocker, sir."
"Noted, Mr. Knobs.
thank you for your opinion.
Now, care to do the honors?"
Stokes tossed a third leather ball to his apprentice.
Nalt sighed, and in a fit of frustration hefted the ball with all his inconsiderable strength.
To his astonishment it sailed away in a gentle arc, heading straight for a second story window.
Dirt showered the two men from the spot where the dog had been.
A stream of smoke raced away, on course to intercept the flying target.
With a mighty leap and an aerial twist, the mechanized hound caught the ball between it's
teeth.
It flipped twice, and landed gently on it's paws beside the university's west wall.
Then exploded.
Stokes stared at the smoldering crater.
Bits of wall crumbled backwards into a classroom.
All that remained of the robotic pooch was a blackened skull, still gnawing at the leather
ball.
Students rushed about.
Some were putting out small fires, while others extracted a stunned teacher from the rubble.
Stokes tapped his fingers thoughtfully against his chin.
"Hmm.
You may have a point this time, Mr. Knobs."
"Nalt, sir."
Nalt peeked out from behind master Stokes, eyeing the chunks of what had just been a
dog.
"Perhaps this one is more suited for public service.
Give Captain Fergus a ring.
The City Patrol could always use a hand keeping the local riffraff in line."
Nalt looked at the crowd gathering around the classroom's new back door.
"Something tells me he will be here shortly, sir."
"Ah, very good."
Stokes took a deep breath of the smokey air, smiling like a child who had just made his
first slingshot.
"All in all I'd call this another smashing success, wouldn't you?"
Nalt put a hand to his temple as another section of wall gave way.
"I do believe it will go down as one of your more, uh, notorious works, sir."
Hey guys!
Thank you for watching the first episode of Tall Tale TV.
Normally I would take this moment to talk about the author, but in this case that's
me!
Instead, I'd like to talk to you a little bit about this project.
I created Tall Tale TV as a way of helping readers and authors find eachother.
There are so many talented writers out there creating some amazing stories.
Theres just not enough time in the day to read them all.
Here we will provide you with hundreds of stories by hundreds of authors.
Some published, some still trying to be.
If you hear a story that you like, we'll provide you with information on how you can find that
author.
Go to their website, show them some love.
You could even share their video with friends and spread the word.
Maybe even buy a book from them.
And after that, make sure to check back here and subscribe to find another author.
Thank you so much, and that's if, for todays Tall Tale TV.
-------------------------------------------
Should you Buy a Property with someone else? - Duration: 5:55.
The question I'm often asked, "Should I buy a property with someone else?"
Because I mean, it sounds like a good idea.
It is a high-value transaction, and it can seem a little bit daunting to do it on your
own.
So we've got to have a look at our options.
The first one is, if I buy it with someone else I can buy it as Joint Tenants.
The most obvious example is as a Husband and Wife.
They purchase a property, they have equal shares, and if one was to pass away, the rule
of survivorship applies.
Where automatically that person's share goes to the surviving partner.
So that's number one.
It's the most common and it's really the default decision.
The second option is what's called Tenants in Common and this is what's more like a business
relationship.
So there's shares which can be equal but they can also be unequal.
A business partner or a friend for example, might want to buy a property 70% in one person's
name, and 30% in another person's name; and the easy way to do that is through Tenants
in Common.
Then there's actually a third option where you actually get a combination of both.
Think, for example, husband and wife want to help a younger brother get onto the property
ladder.
They're going to have a 60% share in the property and the brother is going to have 40%.
So that relationship is Tenants in Common, but the 60% between husband and wife can be
a Joint Tenant relationship where the rule of survivorship will apply in that scenario
so you can actually combine them.
So the question is, "When would you actually do Tenants in Common?"
And the most obvious one is when there are tax considerations.
What if you've got a high-income earner and they want to take advantage of negative gearing?
They may want to have a higher percentage in their name versus the lower income earner
that won't get as many lower gearing benefits.
Or, they may have a short-term view where they're going to sell the property in a short
period.
So they may want to put a high ownership in the lower income earner's name, for capital
gain's tax purposes and pay less when they sell.
It can get a little bit complex, so you definitely need to get your accountant's involvement
in this.
The other time you'd use tenants in common is essentially when you've got friends or
relatives or business partners who want to buy property with you and you don't necessarily
share that light agenda.
You might want to have that formalised agreement before putting everything in place.
Another case will be if you have unequal contributions.
What if I'm buying with you and you've got a $200,000 deposit, and I've only got $100,000
deposit.
We could put two-thirds in your name and one-third in my name, so it better reflects the contribution
that we make into the property.
Or another time would be if there is an estate planning in place.
What if I have children from a previous marriage and I want to make sure that they are looked
after in my estates.
So they are the common times when you go Tenants in Common.
When would you go Joint Tenants?
It's pretty obvious.
It's when you're sharing your life agenda.
And husband and wife again is the most common example where we're going down the same path
and that life agenda is we can make decisions together with regards to Joint tenants.
So what are the pros of buying with someone else?
The first one is, you can get into the market sooner.
Because if you're sharing your resources and you're splitting the costs and the deposits
less, maybe half, then repayments, you're only making half, that might be a really attractive
proposition for some people.
And also there's the perceived security that comes from buying with someone else.
There's also the familiarity as well.
I know this person; I'm comfortable with this person, and the financial transaction's a
bit scary, isn't it?
So that familiarity might be really appealing.
What are the cons of, in particular, going tenants in common?
It's joint and several liability, which essentially means you only own a percentage of the property.
When you speak to the bank, they consider that you own the whole property in terms of
servicing and it can actually make buying the next property in some cases, quite difficult.
And the other con is, the often forgotten one.
We go into this relationship positively but what happens if the relationship breaks down?
What if you are best friends when you start and the property transaction makes you the
worst of enemies, or you go into a business relationship and you don't share the same
agenda and you have different things you want to achieve?
How do you solve those things?
That can happen when you have a relationship breakdown.
So for me the answer of should I buy with someone else, there's no one size fits all
here, it just really depends on what you and your accountant come up with or your life
circumstances suggest that you should buy.
But there's one thing I think you should do every single time and that's to get an agreement
in place.
And assume that I need to get out of this relationship today, how would we do that?
And for me, a little tip is to assume that there has to be a minimum of 10 years for
this relationship because quite often, say two friends are going to buy a property, and
all of a sudden, two years' time, they meet a significant other and their life agenda
changes.
All of a sudden, that's going to have an impact on you because ultimately you could sell their
share but it's a very limited market to buy in.
So you're going to have to sell the whole thing.
If you could have an agreement in place that says, if either person decides to sell within
10 years, we have the right to buy that person's share back from the original price they paid.
It's important that you have these firm rules of engagement in place from the very beginning.
But ultimately, it can be a wonderful process where you can get terrific benefits from sharing
property ownership, so you have to do what's best for your circumstances.
-------------------------------------------
Musical man finds 'perfect job' - Duration: 3:18.
For more infomation >> Musical man finds 'perfect job' - Duration: 3:18. -------------------------------------------
Fails of the Month Mega Failarmy Fails Outdoor funny Fails compilation ! - Duration: 8:12.
Fails of the Month Mega Failarmy Fails Outdoor funny Fails compilation !
-------------------------------------------
Talking Tom COLORS Vs Angela Vs Subway Surf Cats Colors Cartoons for Kids Talking Animals Fun - Duration: 10:09.
For more infomation >> Talking Tom COLORS Vs Angela Vs Subway Surf Cats Colors Cartoons for Kids Talking Animals Fun - Duration: 10:09. -------------------------------------------
Local Principal makes house calls to make an impact - Duration: 3:30.
For more infomation >> Local Principal makes house calls to make an impact - Duration: 3:30. -------------------------------------------
Funny Jokes #58 - HOW TO PLEASE A WOMAN - Jokes for kids - Duration: 2:01.
HOW TO PLEASE A WOMAN
A group of girlfriends are on vacation when they see a 5-story hotel with a sign that
reads: "For Women Only."
Since they are without their boyfriends and husbands, they decide to go in.
The bouncer, a very attractive guy, explains to them how it works.
"We have 5 floors.
Go up floor-by-floor,and once you find what you are looking for, you can stay there.
It's easy to decide since each floor has a sign telling you what's inside."
So they start going up and on the first floor the sign reads: "All the men on this floor
are short and plain."
The friends laugh and without hesitation move on to the next floor.
The sign on the second floor reads: "All the men here are short and handsome."
Still, this isn't good enough, so the friends continue on up.
They reach the third floor and the sign reads: "All the men here are tall and plain."
They still want to do better, and so, knowing there are still two floors left, they continued
on up.
On the fourth floor, the sign is perfect: "All the men here are tall and handsome."
The women get all excited and are going in when they realize that there is still one
floor left.
Wondering what they are missing, they head on up to the fifth floor.
There they find a sign that reads: "There are no men here.
This floor was built only to prove that there is no way to please a woman."
-------------------------------------------
New York | Midtown North | The Diamond District - Duration: 2:10.
In this block between 5th and 6th Avenues,
we can find some 2000 jewelry businesses, like this one here.
You can also find a lot of different nationalities
but the traditional majority has been eastern European Jews,
and they arrived in New York in the Second World War,
escaping the Nazi persecution in Europe
and they brought with them some useful skills
for the diamond trade too, like their expertise in cutting,
setting, and polishing diamonds.
And today, some 90% of the diamonds that
enter the United States, pass through this one single block.
The Orthodox and the Hasidic Jews brought some interesting
vocabulary to the trade.
For example, you don't want to buy any shlock,
because this is actually second-rate merchandise,
and if someone calls you a feinschmecker that literally means
you're a fine sniffer or a connoisseur with expensive taste.
But things are not looking so good if you're called a shtinker
because a shtinker is a person who never pays.
-------------------------------------------
This Md. man made a snowplow using a toilet - Duration: 0:54.
For more infomation >> This Md. man made a snowplow using a toilet - Duration: 0:54. -------------------------------------------
Machine Learning With Python - Supervised VS Unsupervised Learning - Duration: 5:04.
Hello!
In this video, we'll provide some basics on supervised and unsupervised learning.
An easy way to begin grasping the concept of supervised learning is by looking directly
at the words that make it up.
Supervise means to observe and direct the execution of (a task, project, or activity)
Obviously, we aren't going to be supervising a person?
Instead, we'll be supervising a machine learning model that might be able to produce classification
regions like we see here.
So how do we supervise a machine learning model?
We do this by 'teaching' the model.
That is, we load the model with knowledge so that we can have it predict future instances.
But this leads to the next question, which is, how exactly do we teach a model?
We teach the model by training it with some data from a labeled dataset.
It's important to note that the data is labeled.
And what does a labeled dataset look like?
Well, it can look something like this.
This example is just taken from the Iris dataset, which is a famous dataset used for machine
learning.
Let's start by classifying some components of this table.
The names up here, which are called Sepal length, Sepal width, Petal length, Petal width,
and Species are called the Attributes.
a) The columns are called Features, which include the data.
b) If you look at a single data point on a plot, it'll have all of these attributes.
That would make a row on this chart, or an observation.
c) Looking directly at the value of data, you can have 2 kinds.
d) The first is numerical.
When dealing with machine learning, the most commonly used data is numeric.
e) The second is categorical? that is, it's non-numeric, because it contains characters
rather than numbers.
In this case, it is categorical because this dataset is made for Classification
f) Usually, a dataset like this will be put into a .csv file, or comma-separated value
file.
This file separates Observations by new lines, and attributes by commas (hence comma-separated)
There are two types of supervised learning, classification and regression.
Since we know the meaning of supervised learning, what do you think unsupervised learning means?
Unsupervised Learning is exactly as it sounds.
We do not supervise the model, but we let the model work on its own to discover information
that may not be visible to the human eye.
Unsupervised learning uses machine learning algorithms that draw conclusions on UNLABELED
data.
Unsupervised learning has more difficult algorithms than supervised learning, since we know little
to no information about the data, or the outcomes that are to be expected.
With unsupervised learning, we're looking to find things such as
groups/clusters, perform density estimation, and
dimensionality reduction.
In supervised learning, however, we know what kind of data we're dealing with, since it
is labelled data.
In comparison to supervised learning, unsupervised learning has:
fewer tests and Fewer models that can be used in order to
ensure the outcome of the model is accurate.
As such, unsupervised learning creates a less controllable environment, as the machine is
creating outcomes for us.
Now, let's investigate a machine learning algorithm.
Here we can see the output of an algorithm applied to examining poisonous mushrooms.
As you can see, it tells us if a mushroom is poisonous or edible, depending on its features.
So, without looking at the data itself, do you think this a supervised or unsupervised
machine learning problem?
The answer is supervised Machine Learning, as this is an example of classification.
That is, it classifies mushrooms into two different labels: poisonous or edible.
Specifically, it does so using a classification tree algorithm.
The biggest difference between Supervised and Unsupervised Learning is that supervised
learning deals with labeled data while Unsupervised Learning deals with unlabeled data.
In supervised learning, we have machine learning algorithms for classification, and Regression.
Classification is the organization of labeled data.
Regression is the prediction of trends in labeled data to determine future outcomes.
While it's possible to classify data using regression, covering that now is out of scope
for this course.
In unsupervised learning, we have clustering.
Clustering is the analysis of patterns and groupings of unlabeled data.
Thanks for watching!
Không có nhận xét nào:
Đăng nhận xét