Waching daily Jan 2 2017

Use template file to change size or to edit

change color

Print the drawings on A4 size paper

Cut papers

Align papers on foam board (35*50*0.5cm)

Paste papers on foam board

Cut foam board into smaller parts

carefully cut the drawings

Using pencil draw bending, folding lines

Cut the edges of foam in Diagonal angle

Closer view for the edges

Use sand paper (600P) to smooth the edges

Smooth result

Use pointed head tool to engrave the foam at pencil lines

Bend and reshape the foam to match between top and side views

Use hot silicone to bind the sides together

Welded sides

Repeat welding by hot silicone for the other sides

Smooth the edges using sand paper

Add two foam sticks (0.5cm) on both sides

cut foam to make car bottom cap

Print the colored layout. or the desired design

cut the drawings

Paste the paper pieces on the car

End result

combine all of previous parts to make this steering

We will simply attach Servo motor to it

attach the steering to the bottom board

I want to use simple motor and link it to the gear

by using rubber band

but you can use motor reducer instead

I found this method is better than using reducer

it gives you faster drive, but you ill waste a lot of rubber bands

I used mini servo contents to attach rear lights to it

Remove the motor and solder your LEDs instead

in this way you can connect LEDs to Receiver

I'm using 2.4 GHz 3CH (Flysky) transmitter with receiver

Connect ESC with motor, battery and to CH2 on Receiver.

Connect Servo to CH1. Front LEDs to CH3. Rear LEDs with ESC on CH2 (Use Servo extension)

Rear lights should work as you move backward

For more infomation >> How To Make A RC DIY CAR | Chevrolet Camaro - Duration: 5:17.

-------------------------------------------

Point Defiance to Pike Place Market Seattle Video - Duration: 1:04.

Hi Cuties...

Hey Buddies...What do ya think? Hi...

It's a clear day in Tacoma for December.

Music plays...

Pike Place Market

Music plays for rest of video...

For more infomation >> Point Defiance to Pike Place Market Seattle Video - Duration: 1:04.

-------------------------------------------

Do We Poo in Heaven? Try Not to Laugh - Duration: 0:39.

Does Heaven have potties? Or No?

I don't know...What do you think?

I think no!

Can you tell me? Do we go Poo in Heaven?

I don't know Jayson

Do we have potties in heaven?

Why you don't know?

Because I don't know everything.

You don't know what different countries?

Heaven's a different country?

Mommy, have you been to England or no?

Is your big brother funny?

For more infomation >> Do We Poo in Heaven? Try Not to Laugh - Duration: 0:39.

-------------------------------------------

A Girl Like You - Runi's Version - Duration: 1:22.

Angel Face, We just met Well just how lucky can one boy get?

There's a light, in your eyes, I know it's love and I know that I could be happy, with

a girl like you.Hmm Hmm.Tell your Ma, tell your Pa, and tell your favorite ol' wishing

star We're in love, and just by chance,

I asked you, would you like to dance? Fancy dancing,with a girl like you. Funny how love can come to a lonely heart,

I'm a boy and you're a girl,

I guess that's a pretty good start.Here I am, there you are, together baby we should go far.

A girl like you, a boy like me, two hearts together like they ought to be

Can't believe, I got a girl like you.I got a girl like you.

Gotta girl like you.

Got a girl like you

For more infomation >> A Girl Like You - Runi's Version - Duration: 1:22.

-------------------------------------------

TENNYSON COORAY in JOLLY BUWA Sinhala Full Comedy Movie- Part 1 - Duration: 55:55.

TENNYSON COORAY (ටෙනිසන් කුරේ) in JOLLY BUWA Sinhala Full Comedy Movie- Part 1

Cast- Tennyson Cooray (ටෙනිසන් කුරේ), Dilhani Ashokamala Ekanayake (දිල්හානි අශෝකමාලා), Nilanthi Dias (නිලන්ති ඩයස්), Ronnie Leach AKA Thattaya

Produced by- Cyril Fernando Directed by- Suriya Amarasena

For more infomation >> TENNYSON COORAY in JOLLY BUWA Sinhala Full Comedy Movie- Part 1 - Duration: 55:55.

-------------------------------------------

Wax Polishing Polymer Clay Tutorial (Intro Vol-034-3) - Duration: 1:24.

Hi Guys its Cindy Lietz, your Polymer Clay Tutor, and today I'm gonna show you how to

do Wax Polishing your Polymer Clay beads.

And nothing's nicer than a beautiful glassy, shiny Polymer Clay bead.

Those of you who have done it before, know that in order to get a nice, smooth surface,

you usually have to sand and buff for a very long time.

That can be quite tricky on certain surfaces, surfaces such as little tiny round beads,

or surfaces that have lots of depth to it, like this molded Faux Jade Medallion.

So one really nice way to get a nice finish on your Polymer Clay is to use a Paste Wax.

And recently Doug's parents gave me a bunch of their old cleaning supplies and things,

and in there was a jar of paste finishing wax.

And I hadn't tried it on my Polymer Clay, I'd heard that it was a good finish, but I

hadn't tried it yet and I wanted to do my own testing.

So sometime back, I tested it on

For more infomation >> Wax Polishing Polymer Clay Tutorial (Intro Vol-034-3) - Duration: 1:24.

-------------------------------------------

Filling Bezels With Polymer Clay Tutorial (Intro Vol-034-2) - Duration: 2:47.

Hi Guys its Cindy Lietz, your Polymer Clay Tutor, and today I'm gonna teach you how to

fill bezels with Polymer Clay.

Now bezels come in all kinds of different shapes and sizes, I've got a whole bin here.

Most of these are from Terry Morris at EpoxyJewelry.com, and there is just unlimited variety of bezels

that you can fill with Polymer Clay.

Now, I've got a few examples here of what I've made with some of the bezels.

I've got some from a previous tutorial where I've used some Rose Petal Clay inside a little

Copper bezel here.

I've got another one with the Rose Petal Clay in a Silver bezel, and a square Black Enameled

Bezel.

I've got an example of a Cane Slice, this is a little Spider cane, and it's inside of

a Silver Plated bezel and it has some UV Resin on the top of it, which makes it really pretty.

This is another cane slice, this is from the shaded rose cane in Volume 32 and this also

has a UV Resin on the top.

Here is another pendant where I put some of the Faux Knit Technique on the inside, and

this doesn't have Resin on the top, so that you can feel and see the texture really well.

Here's another example of a pendant and this one is in kind of a raised form and this has

a section of the Aurora technique in it, and that's from Volume 33, and it has kind of

a stone look to it.

I've also got some examples of some bezels that were from a previous tutorial, and these

are the Katiedids Bezels, and they have a special hole inside of them, and you have…here's

another one here that's used as a pendant, and the pin goes right through the whole bezel

itself, there's also one made into a ring here.

And then another type of bezel that you can actually make yourself, this is a spoon bezel

that we learned to how to make these into bales in Volume 22.

So there is just absolutely tons of varieties and techniques that you can do with bezels,

so it's something that you definitely need to know how to do

For more infomation >> Filling Bezels With Polymer Clay Tutorial (Intro Vol-034-2) - Duration: 2:47.

-------------------------------------------

Aquaponics Family Farm Short Documentary (Aqua Gardens Family Farm) - Duration: 2:01.

Have A Enjoyable Time Touring Aquaponics Farm With Short Documentary :-)

For more infomation >> Aquaponics Family Farm Short Documentary (Aqua Gardens Family Farm) - Duration: 2:01.

-------------------------------------------

Grape Hyacinth Cane Polymer Clay Tutorial (Intro Vol-034-4) - Duration: 1:51.

Hi Guys its Cindy Lietz, your Polymer Clay Tutor, and in today's video I'm going to show

you how to make a Grape Hyacinth Cane.

And this is one of my own flower cane designs, and it has the look of a stylized grape Hyacinth.

But depending on the colors that you choose, you can also make it look like a Foxglove

or a different type of Hyacinth or maybe even a Hollyhock or something like that, so depends

on what colors that you choose will give the different looks to this flower cane.

Now I have a few examples of some beads that I have made using this cane.

Here is a pendant and I've got a piece of the cane there with some little leaves sticking

out into the background.

Here's another bead that's a teardrop shape, so it lends well to the shape of this cane

and I've got a few canes around the outside edges, and it's more of a dimensional type

bead.

I have some cane slice beads as well that have been made into a pair of earrings, and

these little Niobium Wires look beautiful with this particular color combination of

cane.

Here is a regular cane slice bead and the hole goes right through the center, so it

has a lot of different types of things that can be done with that.

And then here is another little pendant or charm made with the other colors that I chose

for this particular cane.

Now, the colors that are we gonna be using are from

For more infomation >> Grape Hyacinth Cane Polymer Clay Tutorial (Intro Vol-034-4) - Duration: 1:51.

-------------------------------------------

Rose Petal Beads Polymer Clay Tutorial (Intro Vol-034-1) - Duration: 2:13.

Hi Guys its Cindy Lietz, your Polymer Clay Tutor, and in today's video I'm gonna teach

you how to make Rose Petal Beads.

And although they are called Rose Petal Beads, you can actually make them with any dried

flower petals that you choose, and I've got a few examples here of all the different dried

petals that I've used, and the clays that I mixed from the petals, and the beads that

I made from the clay.

Now this is a wonderful way to commemorate any time that you've got in your life that

you've had flowers from; a wedding, a graduation ceremony, a baby's birth or even a memorial.

Now this particular project today has got special meaning to me, because these flower

petals all came from a memorial service for my uncle.

Now last year, my uncle died of prostate cancer and my aunt collected all these flowers and

dried them from his memorial, and I wanted to make her a whole bunch of beads with the

petals that she could share with her family and friends.

I've got a few examples here of some of the beads that I've been making from the clay,

I've got the typical rosary style bead here in this small round shape.

I've also got some pendants that I've started creating with the clay here, and they're put

into bezels of different types.

I've also got some buttons, now my aunt is a sewer and she also makes art quilts and

so I've decided that making her some buttons would be a wonderful way for her to use some

of these flower petal beads.

Now, over the years I've really perfected a little system for making these beautiful

colors with the rose petals and the clay.

Now, what you're gonna need is

For more infomation >> Rose Petal Beads Polymer Clay Tutorial (Intro Vol-034-1) - Duration: 2:13.

-------------------------------------------

How to change Facebook PROFILE NAME BEFORE 60 DAYS - Duration: 3:20.

[music]