Waching daily Feb 21 2019

ALRIGHT WWORKING ON THIS PILOT PULLED THE COIL PACK OUT AND THERES OIL COVERING IT AS

YOU CAN SEE RIGHT THERE ALL KINDS OF NASTY OIL SO ON FURTHER INSPECTION FOUND OUT THAT

THE THE TOP SEAL FOR THE OIL TUBE SEAL WELL BASICALLY THE OIL TUBE SEAL HAS ROLLED OVER

ON ITSELF ON TOP I NEED TO TAKE OFF THE VALVE COVER AND SEAT THAT SEAL CORRECTLY I'M GOING

TO SHOW YOU A TRICK OF WHAT TO DO IF YOU GUYS ARE WORKING ON A HONDA ACURA J SERIES V6 AND

YOUR DOING THE IT WOULD BE THE VALVE COVER GASKET AND THE OIL TUBE SEALS THE TOP OIL

TUBE SEALS A TRICK THAT WILL HELP PREVENT HAVING THE TOP SEAL ROLL OVER ON ITSELF BUT

I'M ACTUALLY GOING TO CHECK THIS ONE AND THIS ONE AS WELL BECAUSE I DID THIS NOT TOO LONG

AGO AND I DID IT IN A RUSH SO I WANT TO MAKE SURE THE OTHER TWO REAMING ARE GOOD TO GO

AS WELL SO I'M GOING TO REMOVE THOSE AND DOUBLE CHECK SO THERE ARE THE OTHER 2 COIL PACKS

THERE BOTH GOOD NO OIL THERES NO OIL HERE OR HERE JUST THAT ONE THERE THAT'S FULL OF

OIL BECAUSE OF THE SEAL OK GOT THE VALVE COVER OFF HOPE YOU GUYS CAN SEE THAT BUT TOP TUBE

SEAL ISN'T SEATED ALL THE WAY CORRECTLY LET'S FLIP THE VALVE COVER OVER TAKE THESE OUT BEFORE

I LOSE THEM SO THERES THE PROBLEM RIGHT THERE YOU CAN SEE IT'S POPPED UP OR I DIDN'T PUT

IT ALL THE WAY DOWN CORRECTLY SO THAT IS WHY WE ARE LEAKING OIL INTO THE SPARK PLUG TUBE

AND THAT'S WHY THE COIL PACK IS FULL OF OIL SO KEY ITEM TO TAKE AWAY FROM THIS BOYS AND

GIRLS IS MAKE SURE THESE ARE SEATED CORRECTLY AND WHEN YOU GO TO INSTALLED THESE IT'S A

GOOD IDEA TO PUT SOME GREASE HERE HERE HERE ON THE FRONT AND THE BACK ONES AS WELL THAT

WAY THEY GO ONTO THE OIL TUBE SEAL NICE AND NEAT SO THAT WAS MY TIP FOR YOU GUYS PUT GREASE

ON TOP OF THE OIL SEALS IN THE VALVE COVERS WHEN YOU INSTALL THIS I'LL PULL THIS OUT I'LL

PUT A LINK IN THE DESCRIPTION BELOW WHERE I GO OVER THIS WHOLE THING BUT I JUST WANTED

TO SHOW YOU WHAT THIS PROBLEM WAS AND WHAT HAPPENS YOU DON'T PUT A TOP TUBE SEAL IN CORRECTLY

I'LL PUT SOME LINKS IN THE DESCRIPTION BELOW GOING OVER THE SPARK PLUGS AND PUTTING OIL

TUBE SEALS IN THIS J SERIES VALVE COVER GASKETS ALRIGHT GUYS HAVE A GOOD ONE